Farm Equipment - one seventy front end

Print Page | Close Window

one seventy front end

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=193687
Printed Date: 08 Sep 2025 at 1:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: one seventy front end

Posted By: rick ky
Subject: one seventy front end
Date Posted: 22 Feb 2023 at 8:35pm

looking for info on changing wide front to narrow

Replies:

Posted By: coggonobrien
Date Posted: 23 Feb 2023 at 11:14am

Dr allis did it using a d17 pedestal. the d17 pedestal is shorter but looks correct, the 170 was the same as a d19

Posted By: rick ky
Date Posted: 23 Feb 2023 at 5:24pm

will be putting 9.50-15s on front of tractor, hopefully that will take care of some of the height issuses. looking at the spare diesel engine I have, planning on it sliding into position. schmit and sons is going to get me a new mud shield for under the rack and pinion. Looking for square head bolts for the front weights, and square head bolts for the power assist wheels. make list longer need new bolts for center dish to rear axle.

Posted By: rick ky
Date Posted: 24 Feb 2023 at 12:55pm

what is the length of the studs to connect the wrap around weight to the front of a early 100 series, allis part number 244995. rear wheel square head bolts 3/4"nc x2 1/4", part # 0922394-2. these part numbers are all old numbers, I am sure the numbers have changed. thanks