Print Page | Close Window

Injector washers

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=19358
Printed Date: 08 Feb 2025 at 12:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Injector washers
Posted By: cdreb
Subject: Injector washers
Date Posted: 12 Oct 2010 at 6:48am
What is the best way to get the copper sealing washers out from the seat they sit in ? This is on a 3500, 7060 the 190's are easier, but these are bigger diameter and IT book says nothing. Thanks guys


Replies:
Posted By: DrAllis
Date Posted: 12 Oct 2010 at 6:49am
They are exactly the SAME part number for 426 and 301 engines.

Posted By: Adam Stratton
Date Posted: 12 Oct 2010 at 8:02am
Someone told me to use a 5/8 coarse thread tap.  Put a little down pressure on it and screw it in with your hand, and after you feel it bite, pull it out.  I have only done it once, and it worked like a charm.  Good luck!

Posted By: skipwelte
Date Posted: 12 Oct 2010 at 11:15am

Ive used and oring pick to get under the ring and pry it up.  The 5/8 tap sounds like a good idea too.


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net