hitch / snap coupler assembly for D17
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=193322
Printed Date: 12 Nov 2024 at 3:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: hitch / snap coupler assembly for D17
Posted By: uldmoore2009
Subject: hitch / snap coupler assembly for D17
Date Posted: 06 Feb 2023 at 9:13am
| i recently bought a D17 series one (1959) that was missing the hitch , i have a lead on a complete snap coupler assembly off a series 4 ( i believe 1966) and am wondering if it would fit any input would be greatly appreciated as i am very new to this |
Replies:
Posted By: DrAllis
Date Posted: 06 Feb 2023 at 10:33am
| Nope. Series 4 D-17 drawbar fits a series 4 only. You need parts from any older D17 1957 thru 1963. |
Posted By: uldmoore2009
Date Posted: 06 Feb 2023 at 10:47am
| thank you |
Posted By: uldmoore2009
Date Posted: 08 Feb 2023 at 6:28am
| would anyone be able to get me a dimensioned drawing of the drawbar assembly i would be able to fabricate one ? |
Posted By: DrAllis
Date Posted: 08 Feb 2023 at 6:47am
| There are two drawbar "bails" for an older D-17. The original (like yours would have been) narrow bail and the newer (1960 and up ?) wider bail. Then, there is the drawbar itself, that is 3 feet plus long that connects to the snap-coupler bell and hangs from the bail, extending 14 inches beyond the end of the PTO shaft. There are also two mounting ears bolted under the lift arm housing for the bail to attach/hang from. What do you actually need ?? A salvage yard is your friend !! Call 563-357-2615 Bill Deppe. Maybe he has what you need. Maybe someone can post a picture of a drawbar hanging on an older D-17 ?? |
Posted By: AC720Man
Date Posted: 08 Feb 2023 at 8:55am
 ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 08 Feb 2023 at 8:58am
 ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 08 Feb 2023 at 8:59am
 ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 08 Feb 2023 at 9:02am
|
I’m sorry for the sideways pictures, sometimes they appear correctly and sometimes they don’t. My 1959 D17 ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 08 Feb 2023 at 9:04am
 ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: uldmoore2009
Date Posted: 08 Feb 2023 at 4:42pm
| Can any of you knowledgeable people tell me the cylinder numbering and firing order for my d17 ? |
Posted By: SteveM C/IL
Date Posted: 08 Feb 2023 at 8:29pm
| #1 is at the front. I'd have to look at my distributor or book for order. 1,3,4,2 or 1,2,4,3. Distributor turns clockwise i think. Pop cap off and watch it while cranking. Is it not together and working? |
Posted By: Macon Rounds
Date Posted: 08 Feb 2023 at 8:38pm
|
I have the bail and drawbar you need.... I am located in Hookstown Pa. Which is just across the state line by East Liverpool Oh. ------------- The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate |
Posted By: uldmoore2009
Date Posted: 08 Feb 2023 at 8:40pm
| It is all together except the cap and rotor and all the wires were gone I bought a tune up kit and am in the process of trying to get that together |
Posted By: DrAllis
Date Posted: 08 Feb 2023 at 10:01pm
| One- two- four- three. |