Print Page | Close Window

Project 160 second hydraulics complete

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=193163
Printed Date: 28 Mar 2024 at 7:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Project 160 second hydraulics complete
Posted By: AC720Man
Subject: Project 160 second hydraulics complete
Date Posted: 29 Jan 2023 at 11:22am


-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD



Replies:
Posted By: AC720Man
Date Posted: 29 Jan 2023 at 11:23am


-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: AC720Man
Date Posted: 29 Jan 2023 at 11:25am
Added the second set of remotes finally on my 160. Looking forward to using it on our Enrossii 4 basket Tedder which takes 3 outlets.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: Unit3
Date Posted: 29 Jan 2023 at 7:52pm
Great job. Do you still need one more? If so, could you get by with a one way cylinder?

-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C


Posted By: AC720Man
Date Posted: 29 Jan 2023 at 9:32pm
I’m good to go now. Tedder has 4 basket fold and tilt. This is a project I’ve been wanting to do ever since I bought the tractor almost 2 years ago. My left side lines were damaged so I found left side lines from a 160, right side lines from a 6040 and a second remote.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: AC720Man
Date Posted: 30 Jan 2023 at 6:22pm


-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: AC720Man
Date Posted: 30 Jan 2023 at 6:25pm
Tested my hydraulics this afternoon to move our AC disk. Worked well.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: BrianC
Date Posted: 01 Feb 2023 at 7:12am
I like the picture of the big disk hooked up. I know it can't pull it through the dirt,
but it looks good.
Picture must of had an impact on me, I woke up dreaming
I was running a 3x16 roll-over plow on my 160. So that is a stretch,
however, with enough ballast, in sandy soil, maybe.


Posted By: AC720Man
Date Posted: 01 Feb 2023 at 7:36pm
Brian, I have sales literature of the 160 as a “3 plow” tractor. There is a picture of a 160 plowing a field, pulling a 3 bottom mono frame semi-mount plow. I’m sure 16” bottoms. Has pie weights and guessing loaded tires as well. That 2000 disc is heavy and makes my XT snort so I didn’t want to drop it in the ground to watch it spin even with wings folded in lol.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net