D14 Rear Rims
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=193004
Printed Date: 19 Jan 2025 at 8:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D14 Rear Rims
Posted By: rjranch
Subject: D14 Rear Rims
Date Posted: 19 Jan 2023 at 2:05pm
| Looking for suggestions to what combine rim will work on a D14. I do not need to spin out for the tractors uses and would like to go with a 28" rim since used tires in 28" are easier to find. Anyone have a suggestion? |
Replies:
Posted By: DSeries4
Date Posted: 19 Jan 2023 at 2:17pm
|
26" Rims are more common than 28s, but they use a bigger tire. Keep in
mind, combine rims stick out wider than the power adjust rims. They
will not sit close to the fender. These are 18.4 x 26 combine rims on my D17:  Same tractor with power adjust rims: 
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: jaybmiller
Date Posted: 19 Jan 2023 at 3:42pm
|
probably any that are 26" with 8by8 bolt pattern..... I've got a mix of spinout(power adjust) and combine on my 3 D-14s. ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: steve(ill)
Date Posted: 19 Jan 2023 at 3:44pm
|
as Myron said, most combines are 26 inch and WIDE... What you want is a 28 inch rim about 12 inches wide with an 8 bolt pattern ??? your probably talking about something like this, with an adaptor plate to 8 bolt axle  ------------- Like them all, but love the "B"s. |
Posted By: tractorboy
Date Posted: 19 Jan 2023 at 6:28pm
I once owned a 14 that someone had changed rear rims , can't remember what size but they were taller than original . I didn't like them cause they changed the gear ratio, seemed a little short on power but I could walk away from 'em on the tractor rides !! keith so. va.
|
Posted By: steve(ill)
Date Posted: 19 Jan 2023 at 9:01pm
|
i think original tires on the D14 were 12 x 26 ........... if you get combine tires they would be 14.9 or 16.9 x 26 ... so taller ........... if you go to a 28 inch rim, i would stick with 12.4 tires to keep the height within a couple inches of original.
------------- Like them all, but love the "B"s. |
Posted By: DSeries4
Date Posted: 20 Jan 2023 at 1:19am
|
For a combine 16.9 x 26 and 18.4 x 26 would be most common. I have 3 D14s. None of them have 12.4 x 26. Those would be tiny in my opinion. 13.6 x 26 seems pretty common on a 14. I am running 14.9 x 26 on all of mine. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |