Farm Equipment - 160 LH tie rod end

Print Page | Close Window

160 LH tie rod end

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=192928
Printed Date: 11 Oct 2025 at 12:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 160 LH tie rod end

Posted By: Pafarmer92
Subject: 160 LH tie rod end
Date Posted: 15 Jan 2023 at 2:24pm

Hello I’m looking for a left hand tie rod end for my standard ac 160 I understand they are no where to be found however I’ve heard of guys who have used one from a parts store and welded it to the old tie rod after going to a couple parts stores they are no help as to finding a tie rod end close to the size I need I was wondering if anyone on here had suggestions on one that might work thanks.

Replies:

Posted By: Mikez
Date Posted: 15 Jan 2023 at 5:22pm

Might be able to help you. Let me do some digging for part numbers

Posted By: pump grump
Date Posted: 15 Jan 2023 at 8:22pm

I`ve got mine from AGCO .

Posted By: MACK
Date Posted: 15 Jan 2023 at 8:24pm

Most parts people today only know what that screen in front of them tell them. MACK

Posted By: steve(ill)
Date Posted: 15 Jan 2023 at 9:06pm

if your going to do it yourself, your going to need to figure out the thread diameter and thread pitch , and left hand thread... then cross reference on a chart.. Is it METRIC or ENGLISH thread.. etc.

https://www.moog-suspension-parts.com/universal_outer_tie_rod_ends.asp" rel="nofollow - https://www.moog-suspension-parts.com/universal_outer_tie_rod_ends.asp

-------------
Like them all, but love the "B"s.

Posted By: Mikez
Date Posted: 15 Jan 2023 at 9:23pm

Which front axle do you have

Posted By: acjwb
Date Posted: 15 Jan 2023 at 10:15pm

I replaced two a couple months ago. I had to go to two different auto parts stores to finally get them. The parts boy and I went back and just started comparing them till we found one that would work. I took my old one with me. The one I used was Duralast FA2101. I got mine from Autozone but can be crossed to other brands. I also saw it online. My tractor has power steering and the model is spelled out "one sixty" Hope this helps. Might pick one up at local store and make sure it fits yours.

Posted By: Alvin M
Date Posted: 16 Jan 2023 at 5:36am

I use Case IH part # K207722 cut old one off drill hole weld in or tap threads I did 12 that way

Posted By: Mikez
Date Posted: 16 Jan 2023 at 4:57pm

72074176 is the wrong one ha. For different style front end.