Farm Equipment - 190XT Starter

Print Page | Close Window

190XT Starter

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=192918
Printed Date: 03 Apr 2026 at 1:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190XT Starter

Posted By: Gary (sw Wis.)
Subject: 190XT Starter
Date Posted: 14 Jan 2023 at 4:10pm

Is there a trick to getting the starter out without taking the fuel line apart?

-------------
190XT - D17 - D14 - WD45 w/loader - WD - (2)B110 - 616H - 610 - B-208 - WD with 190 Mounted Corn Picker - All Crop 60

Replies:

Posted By: Lynn Marshall
Date Posted: 14 Jan 2023 at 6:33pm

Shut the fuel off at both of the sediment bowls. Take the inlet line loose at the primer pump and also loosen the line at the fuel filter base that comes from the primer. Remove the one bolt that's secures the primer assembly and just set the whole thing aside. Put the bolt back in if it leaks a little antifreeze. Plenty of room then for the starter removal.

Posted By: Gary (sw Wis.)
Date Posted: 15 Jan 2023 at 7:46am

Thanks Lynn, That what I thought, I was hoping to avoid removing thr primer.

-------------
190XT - D17 - D14 - WD45 w/loader - WD - (2)B110 - 616H - 610 - B-208 - WD with 190 Mounted Corn Picker - All Crop 60

Posted By: NDBirdman
Date Posted: 15 Jan 2023 at 9:20pm

I had to remove my primer to remove the starter.

-------------
1955 WD45 S#205467, 190XT #6652 DXT