7060 Blow by tube mount
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=192879
Printed Date: 09 Sep 2025 at 3:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7060 Blow by tube mount
Posted By: AC 426 power
Subject: 7060 Blow by tube mount
Date Posted: 11 Jan 2023 at 7:24pm
I removed the blow tube mount at the bottom of the engine a couple of years ago when I rebuilt the engine and apparently I forgot to install it, tube was in place just no bottom mount and now I can’t remember how it goes on, can’t seem to find anyplace in the area that would take a bolt to mount it, any pics or explanation would be helpful, thanks! 
|
Replies:
Posted By: DrAllis
Date Posted: 11 Jan 2023 at 7:31pm
| One of the oil pan bolts. |
Posted By: MikeKroupa
Date Posted: 11 Jan 2023 at 7:41pm
| It bolts to the bottom side of the oil pan, you just need to remove the corresponding bolts and reattach. The round hose clamp will then be parallel with the bottom of the engine block, slide the vent hose through and all will be good. |
Posted By: Ron(AB)
Date Posted: 11 Jan 2023 at 7:41pm
|
I can check my 7050, maybe get a pic. ------------- 405, 7000, 7050, 8050, 8070, L3, 2300 & 2600 disk |
Posted By: AC 426 power
Date Posted: 11 Jan 2023 at 8:07pm
| Alrighty makes sense, thanks for the replies! |
Posted By: Lynn Marshall
Date Posted: 11 Jan 2023 at 8:21pm
| You'll be able to tell by the lack of paint on the pan rail. |