Farm Equipment - 6080 2wd tie rod end

Print Page | Close Window

6080 2wd tie rod end

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=192825
Printed Date: 23 Nov 2024 at 1:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6080 2wd tie rod end

Posted By: 977.3Ford
Subject: 6080 2wd tie rod end
Date Posted: 09 Jan 2023 at 12:32pm

Having problems finding the right hand tie rod end for our 2wd 6080. Agco part number is 70260801, the number is obsolete and my dealer couldn't cross it over to anything else. It looks like the 6060/6070 share a rod end with a 170/175, but nothing for a 6080. Is there a tie rod out there that will work or am i on my own to make a replacement?

-------------
Jimmy
1982 8050 Powershift
1982 6080
1992 R52 Gleaner

Replies:

Posted By: ac160
Date Posted: 09 Jan 2023 at 1:11pm

Have you tried 70260802? It appears to be the full tie rod with both ends. Also check with some of the sponsors on here. Mcmaster carr seems to have some tie rod ends, but not sure if they will work. I know some of them can get some hard to find items. I am curious what you find out. I have a couple of 2wd 6080s as well, but haven't had to change the tie rod ends yet.

Posted By: Albert
Date Posted: 09 Jan 2023 at 10:21pm

70260802 is no longer serviced by AGCO. I have been looking for a replacement on and off for two years with no luck. If you find please post so we can help others. It is also used on the 7000 with light axle. I had thought of moving cylinder to the left and welding brackets to the tube like the 7000 series did.

Albert

Posted By: jrjuday
Date Posted: 01 Aug 2024 at 11:55am

Has anyone been able to find these tie rod ends?

Posted By: Alvin M
Date Posted: 01 Aug 2024 at 4:50pm

I have 21 of 70260801 tie rod ends I got made 295.00 plus shipping

Posted By: jrjuday
Date Posted: 01 Aug 2024 at 9:19pm

Where are you located?

Posted By: jrjuday
Date Posted: 01 Aug 2024 at 9:41pm

Can I send you a PM?

Posted By: Alvin M
Date Posted: 02 Aug 2024 at 6:31am

Yes u can New Holland PA

Posted By: Gary Burnett
Date Posted: 02 Aug 2024 at 7:01am

Aren't they basically a Fiat except for the motor? might try looking at Oliver 1365 ends.

Posted By: DrAllis
Date Posted: 02 Aug 2024 at 7:21am

Front axle was all A-C.

Posted By: Mikez
Date Posted: 02 Aug 2024 at 7:43am

Curious where you had them made