Carb settings for WD-45
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=19263
Printed Date: 07 Feb 2025 at 9:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Carb settings for WD-45
Posted By: SWMOCraig
Subject: Carb settings for WD-45
Date Posted: 09 Oct 2010 at 7:05pm
|
If anyone has the factory settings, please let me know what they are.
Thanks!
Craig
www.allisbseat.com
-------------
Whenever there is a hard job to be done I assign it to a lazy man; he is sure to find an easy way of doing it.
— Walter P. Chrysler
"Like" us on Facebook at Allis B Seat.Com
www.allisbseat.c
|
Replies:
Posted By: CTuckerNWIL
Date Posted: 09 Oct 2010 at 7:17pm
A good starting point is, lightly bottom both the load screw and the idle screw, then back out 1 and 1/2 turns. There is no factory setting that I ever heard of. Once the engine is warmed up to working temperature adjust as need to make it run the way you want. Dick L probably has his process in a word document so he can paste it here, as many times as this has come up.
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: SWMOCraig
Date Posted: 09 Oct 2010 at 7:33pm
Thanks for the reply. Yeah, the funny thing is I've seen it I don't know how many times and never needed it until now.
-------------
Whenever there is a hard job to be done I assign it to a lazy man; he is sure to find an easy way of doing it.
— Walter P. Chrysler
"Like" us on Facebook at Allis B Seat.Com
www.allisbseat.c
|
|