Farm Equipment - Ts500 work on d19 tractor

Print Page | Close Window

Ts500 work on d19 tractor

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=192603
Printed Date: 07 Apr 2026 at 11:36am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Ts500 work on d19 tractor

Posted By: D19Dillon
Subject: Ts500 work on d19 tractor
Date Posted: 26 Dec 2022 at 11:13pm

Looking for any info if a ts 500 front loader work on d19 and mark herny IV back hoe work also

Replies:

Posted By: DrAllis
Date Posted: 27 Dec 2022 at 7:03am

Any of the implements you are referring to never fit a D-19, that I am aware of. Just D-14-15-17. The D-19 side frames width are the same as the D-15 and D-17. The side frame length on a D-19 is the same as a D-17 diesel BUT, the D-19 grille/grille shell stick out forward another 3 or 4 inches. The D-19 has inboard final drive gears with a straight axle to the wheel, versus outboard final drives with a drop axle. So, I can't imagine things aren't going to work as-is in that area either. Wheelbase is also longer on the D-19 chassis. I'm sure with a torch, welder, chop saw and some bloody knuckles, you can make it work somehow.