Farm Equipment

Print Page | Close Window

8070ps

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=19206
Printed Date: 07 Feb 2025 at 8:07pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8070ps

Posted By: BStone
Subject: 8070ps
Date Posted: 08 Oct 2010 at 7:23am

I assume the input shaft seal is leaking...hyd oil leaking out the bell housing after running a couple of hrs.But the low pressure trans light started coming on after a couple of hrs also when the leak occurred.Trans still pulls fine.I know someone said it could be a wire grounding out or a bad a switch but isn't it odd it only started happening when the seal started leadking? I'm going to get it in the shop next week and start on it.What else should I be checking? Thanks for any replies.

Replies:

Posted By: BStone
Date Posted: 08 Oct 2010 at 3:32pm

bump