Farm Equipment - c drag link

Print Page | Close Window

c drag link

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=191902
Printed Date: 05 Sep 2025 at 5:59pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: c drag link

Posted By: HudCo
Subject: c drag link
Date Posted: 20 Nov 2022 at 9:22pm

what is everyone doing to replace the drag link ends when they are wore out ?

Replies:

Posted By: AaronSEIA
Date Posted: 21 Nov 2022 at 5:50am

Find weld on ones with the right tapered end and do a measure/cut/weld.
AaronSEIA

Posted By: steve(ill)
Date Posted: 21 Nov 2022 at 8:31am

https://www.moog-suspension-parts.com/universal_outer_tie_rod_ends.asp%20" rel="nofollow - https://www.moog-suspension-parts.com/universal_outer_tie_rod_ends.asp

after clicking on above, it will go to a generic page and stop... UP in the LINK at the top of the page, click on the link and backspace to eliminate the %20 .... then hit enter.. You will go to the generic steering link page... I would just match one up as mentioned..
https://www.moog-suspension-parts.com/universal_outer_tie_rod_ends.asp%20" rel="nofollow -

-------------
Like them all, but love the "B"s.

Posted By: HudCo
Date Posted: 21 Nov 2022 at 9:21am

anyone got a paticular part number

Posted By: Nathan (SD)
Date Posted: 22 Nov 2022 at 6:15am

I used TRW es150r