Construction and other equipment - Follow-up question to HD6G diesel in oil

Print Page | Close Window

Follow-up question to HD6G diesel in oil

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=191562
Printed Date: 27 Nov 2024 at 1:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Follow-up question to HD6G diesel in oil

Posted By: Dale
Subject: Follow-up question to HD6G diesel in oil
Date Posted: 30 Oct 2022 at 6:59pm

In changing the seal is there any timing procedures for setting the engine to top dead centre #1? Hopefully I'm making sense asking.

Replies:

Posted By: Ray54
Date Posted: 30 Oct 2022 at 7:15pm

The doctor said transfer pump meaning before the injection pump just to keep a steady flow going into the injector pump. I have not worked on a HD 6 and the Buda engine so look at yours. But with guys saying the same thing I bet you find a transfer pump before the injection pump. If so timing is not a issue.

Posted By: HD6 Merv
Date Posted: 30 Oct 2022 at 9:55pm

HD6 and HD11 with American Bosch PSB fuel pumps; the fuel transfer pump bolts on side of main injection pump. No timing involved to remove, repair and reinstall transfer pump

-------------
tits tyres and tracks

they all cost you money

Posted By: Dale
Date Posted: 31 Oct 2022 at 5:47am

My mistake. Was confused.

Thanks for the clarification.

Posted By: doctorcorey
Date Posted: 31 Oct 2022 at 9:15am

Sorry, should have been more clear about that. I meant, you don't have to disassemble the transfer pump , After you remove it from the injector pump. No timing issues.

-------------
Semper Fi USMC 1958 HD6G, 1959 MF 203 loader, 1960 Case 420B Backhoe, MF 65 Tractor/Loader Diesel