Help id IH or Farmall tractor
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=191468
Printed Date: 25 Jun 2024 at 1:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Help id IH or Farmall tractor
Posted By: KMAG
Subject: Help id IH or Farmall tractor
Date Posted: 25 Oct 2022 at 6:47pm
|
A local church bought property with this tractor hulk on it. Any idea what model? Knowing that would help sell it. Located in Dauphin, PA. Thanks in advance. Supposedly, hood emblem said Farmall before it was removed.   
|
Replies:
Posted By: injpumpEd
Date Posted: 25 Oct 2022 at 6:52pm
|
340? ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: dr p
Date Posted: 25 Oct 2022 at 7:06pm
| Wrong seat for a 340. |
Posted By: DCAC
Date Posted: 25 Oct 2022 at 7:16pm
| 300/350 utility? Had a couple like that a couple years ago |
Posted By: DCAC
Date Posted: 25 Oct 2022 at 7:17pm
| Hood looks more like a 40 series though |
Posted By: RLBPA1
Date Posted: 25 Oct 2022 at 7:18pm
| Tag on the bell housing should identify model. I agree with Ed hood and brake petals look like a 340 |
Posted By: RLBPA1
Date Posted: 25 Oct 2022 at 7:23pm
|
Posted By: JC-WI
Date Posted: 26 Oct 2022 at 1:43am
|
Wrong wheels for a Farmall, but maybe a 460 International? looks like it has a 6 cyl engine. ------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: AaronSEIA
Date Posted: 26 Oct 2022 at 5:52am
|
Did any of the older IH/Farmalls have 2 drag links for steering like the older Ford tractors did? Seat is aftermarket, I think. AaronSEIA
|
Posted By: Charlie175
Date Posted: 26 Oct 2022 at 5:58am
|
Looks like 460 Utility model ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: B26240
Date Posted: 26 Oct 2022 at 6:05am
| I'll go with Ed and say 340 seat looks like it came off an Oliver. |
Posted By: Fred in Pa
Date Posted: 26 Oct 2022 at 6:05am
|
Looks like a 6 cylinder and the square hood , 460 U ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: steelwheelAcjim
Date Posted: 26 Oct 2022 at 9:06am
|
Pretty well cannibalized 460 Utility. Only decent part i see is the PTO delete plate. ------------- Pre-WW2 A-C tractors on steel wheels...because I'm too cheap to buy tires! |
Posted By: TramwayGuy
Date Posted: 26 Oct 2022 at 9:41am
| Could be a 606. |
Posted By: jvin248
Date Posted: 26 Oct 2022 at 10:51am
I'd say Ferguson, not Oliver. I have a seat and seat suspension system just like that on my '55 Ferguson TO35 -- family heirloom tractor bought new and the seat was never mentioned as swapped. Even though it's metal, it's about the most comfortable tractor seat around, including the torsion springs fully collapsed and rusted in place after 70 years. My father must have road that seat a million hours, the hardest working tractor on the farm for any utility job that needed doing. .
|
B26240 wrote:Posted By: Fred in Pa
Date Posted: 26 Oct 2022 at 12:18pm
|
340 was a 4 cylinder with oil filter on the right side of engine . Clearly the oil filter is on the left side as a 6 cylinder in 460 was ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |