3-14 gauge wheel
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=191396
Printed Date: 28 Aug 2025 at 6:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 3-14 gauge wheel
Posted By: bigfish_Oh
Subject: 3-14 gauge wheel
Date Posted: 21 Oct 2022 at 9:33am
|
what rim is available to replace the 4 bolt gauge wheel?, I think it is 4.5 pattern.
-------------
1941 WC sat for 29 years,started & dynoed 27 h.p.
1957 WD45 Grandpa bought new,factory p.s.,added wfe
1951 WD, factory p.s.
1960 D14 HnMk IV BkHoe 4 sale
2014 HD Tri Glide
2009 GMC CC SLT Dually
|
Replies:
Posted By: Tracy Martin TN
Date Posted: 21 Oct 2022 at 9:22pm
|
Bigfish, ag express wheel will be the cheapest most likely. I can measue mine if you have a few days. Tracy
-------------
No greater gift than healthy grandkids!
|
Posted By: PaulB
Date Posted: 22 Oct 2022 at 7:01am
That is a standard 4 bolt AG pattern. You should be able to find something at most any AG bone yard. Many light wagons had 4 bolt hubs.
-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
Posted By: bigfish_Oh
Date Posted: 22 Oct 2022 at 7:02am
|
I'm considering cutting the stub off of a scrap C front end and welding that spindle on.
-------------
1941 WC sat for 29 years,started & dynoed 27 h.p.
1957 WD45 Grandpa bought new,factory p.s.,added wfe
1951 WD, factory p.s.
1960 D14 HnMk IV BkHoe 4 sale
2014 HD Tri Glide
2009 GMC CC SLT Dually
|
Posted By: bigfish_Oh
Date Posted: 22 Oct 2022 at 2:57pm
|
any used will still need restored(mine can be blasted and painted), all new i am finding are 5" pattern. wheel vintiques has one for 108.
-------------
1941 WC sat for 29 years,started & dynoed 27 h.p.
1957 WD45 Grandpa bought new,factory p.s.,added wfe
1951 WD, factory p.s.
1960 D14 HnMk IV BkHoe 4 sale
2014 HD Tri Glide
2009 GMC CC SLT Dually
|
Posted By: Pat the Plumber CIL
Date Posted: 22 Oct 2022 at 7:40pm
Larry there are usually a couple at the Missouri swap meet . I could grab you one but not until March.
Good to here from you , haven't seen you since Dale's show. Do you know if Richard Aiken is still with us. Haven't seen him post in a long time?
-------------
You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails
1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF.
|
Posted By: Jordan(OH)
Date Posted: 22 Oct 2022 at 9:37pm
|
I saw Richard at an auction a little over a month ago.
|
Posted By: Pat the Plumber CIL
Date Posted: 23 Oct 2022 at 9:44am
Good to hear Jordan , thanks for responding
-------------
You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails
1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF.
|
Posted By: orangereborn
Date Posted: 25 Oct 2022 at 1:11pm
|
I should have some 4 hole. Probably both 14 and 15 inch. In your favorite color...Dale
|
Posted By: bigfish_Oh
Date Posted: 25 Oct 2022 at 4:59pm
i'm going to try a 5" and see if the bearing fit the spindle , a c hub and a wd hub, maybe the bearing will match. thanks for the replies, another 4 1/2 that needs restored doesnt gain me anything. Wheel vintiques has a new wheel for 108. that may fit, but it's not worth that yet.
-------------
1941 WC sat for 29 years,started & dynoed 27 h.p.
1957 WD45 Grandpa bought new,factory p.s.,added wfe
1951 WD, factory p.s.
1960 D14 HnMk IV BkHoe 4 sale
2014 HD Tri Glide
2009 GMC CC SLT Dually
|
|