Sickle Mower Allis Chalmers 82S
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=191220
Printed Date: 15 Nov 2024 at 4:21am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Sickle Mower Allis Chalmers 82S
Posted By: John426
Subject: Sickle Mower Allis Chalmers 82S
Date Posted: 12 Oct 2022 at 3:49am
|
Hi I am currently looking to adapt a side sickle mower on my D272. I have some quesion. Looking on the Allis Chalmers 82S side sickle mower for D14 ( or D15, D17) In transport position, to prevent the mower frame going down, due to the slight leak in the hydraulic distributor, or in the cylinder I guess that there is a retaining hook by passing the cylinder. I can't see it on the drawing. Does there is a such device or another option to to block the cylinder in the up position?   |
Replies:
Posted By: DiyDave
Date Posted: 12 Oct 2022 at 4:37am
A chain, attached to the outboard cyl mount, and back to the frame should accomplish what you want, just be sure to mount it to strong points and make sure it doesn't rub anything vital, when its tight... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: AC720Man
Date Posted: 12 Oct 2022 at 7:49pm
|
I have a 82S and I’m unaware of a transport position for the cylinder, the sickle bar transport via the hook rod through the sickle is the only one that I am aware of. Repairing the cylinder or replacing it is your best bet if it’s leaking that bad. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |