Pulling Forum - WD wheel setup

Print Page | Close Window

WD wheel setup

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=191080
Printed Date: 29 Jun 2024 at 12:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD wheel setup

Posted By: AC720Man
Subject: WD wheel setup
Date Posted: 05 Oct 2022 at 4:43pm

Pulling my ole WD this weekend for fun at a local pull. New to pulling the WD so I am curious if the wheels should be spun in tight or out? Is there an advantage?
Thanks
Rob

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD

Replies:

Posted By: DrAllis
Date Posted: 05 Oct 2022 at 5:16pm

As a general rule of what works the best, narrow is best. Why?? because when the wheel tread is wide and one tire gets a greater bite than the other (which happens) it will steer you where you may not want to go and you can't hold it back.