Subsoiler
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=191069
Printed Date: 16 Nov 2024 at 9:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Subsoiler
Posted By: james6600
Subject: Subsoiler
Date Posted: 05 Oct 2022 at 6:21am
Will this fit on a WD45 that has the snap coupler hitch with the bell for the drawbar.    
|
Replies:
Posted By: only AC orange
Date Posted: 05 Oct 2022 at 6:26am
| No, that is for WD pin style hitch! |
Posted By: james6600
Date Posted: 05 Oct 2022 at 6:36am
| Since you use the existing drawbar it doesn’t fit both. |
Posted By: ac160
Date Posted: 05 Oct 2022 at 6:53am
| I think it should. Have a similar one that was used once or twice on a wd45 w/o issues. Probably wrong here, and don't have a book for one, but wouldn't you take the bail off to use it? |
Posted By: james6600
Date Posted: 05 Oct 2022 at 7:01am
| Yea I can’t find any info on this model SS. There’s one for sale by me but I’m not sure it will fit. I haven’t been able to find the newer style with the straight shank and snap coupler. |
Posted By: james6600
Date Posted: 05 Oct 2022 at 1:54pm
| Anyone else have any experience with this SS on a snap coupler draw bar. |
Posted By: DrAllis
Date Posted: 05 Oct 2022 at 1:59pm
| On a non-snap coupler drawbar, the bail never falls off the tractor. You pull the two quick pins and it floats up and down. On the snap-coupler drawbar set-up, the bail has slots on the upper ends. So, when you pull the bail quick pins, it falls off the tractor. |
Posted By: james6600
Date Posted: 05 Oct 2022 at 2:25pm
| Ok so I think what is called the bale is the U shaped piece that adjusts the draw bar up and down on a snap coupler tractor. So if I’m understanding this correctly on a pin hitch you pull the pins and the draw bar moves up and down with the SS which isn’t possible on the snap coupler tractor because of the slots. Am I understanding this right. |
Posted By: dr p
Date Posted: 05 Oct 2022 at 7:12pm
| My wd disc plow hooks up this way too |
Posted By: dr p
Date Posted: 05 Oct 2022 at 7:13pm
| And you got it right |
Posted By: Roger Mn
Date Posted: 05 Oct 2022 at 7:59pm
| also remove your PTO shaft |
Posted By: james6600
Date Posted: 05 Oct 2022 at 8:31pm
| Thanks for the help everyone. |