Print Page | Close Window

Help with 7040 alternator wiring

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=190821
Printed Date: 18 Nov 2024 at 11:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Help with 7040 alternator wiring
Posted By: grinder220
Subject: Help with 7040 alternator wiring
Date Posted: 21 Sep 2022 at 2:44pm
I want to switch to a Delco off an M gleaner. The Neihoff has 4 wires. Delco just 3 terminals. What goes where? Not woried about a tach as it isn't working anyways



Replies:
Posted By: steve(ill)
Date Posted: 21 Sep 2022 at 3:03pm
I can get you started... The BIGGEST wire is the CHARGE that runs to the ammeter / battery.. It is the BIGGEST because it can carry 60 amps ... that is the LUG on the back of the case.

The two spades on top are normally stamped into the case as 1 & 2 or  R & F ..... The #2 is a HOT wire and can be jumpered to the LUG on the back of the case.. always HOT.

The other spade is the excitation...( #1 on the LEFT )... It is turned ON and OFF by the ignition switch.  Normally has a diode , idiot light, or resistor in the line to drop voltage slightly below 12 v to start the CHARGE..

I dont know which wire is which on the OLD alternator..  If you have a wire diagram with colors, you might be able to trace that.





use upper photo, not the one below




-------------
Like them all, but love the "B"s.


Posted By: steve(ill)
Date Posted: 21 Sep 2022 at 3:05pm
"GENERIC" Delco wire diagram.




-------------
Like them all, but love the "B"s.


Posted By: steve(ill)
Date Posted: 21 Sep 2022 at 3:28pm
wire colors ??.......... you have no #3 spade - tach

https://www.allischalmers.com/forum/7060-alternator_topic165085.html" rel="nofollow - https://www.allischalmers.com/forum/7060-alternator_topic165085.html



-------------
Like them all, but love the "B"s.


Posted By: grinder220
Date Posted: 21 Sep 2022 at 7:02pm
Thanks. That'll get me where I need to be with it.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net