Series 1 D17 questions
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=190495
Printed Date: 31 Oct 2024 at 11:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Series 1 D17 questions
Posted By: AC720Man
Subject: Series 1 D17 questions
Date Posted: 05 Sep 2022 at 7:36pm
Finally got around to checking the brakes on my D17 and it’s not good. Right side drum is grooved pretty bad assuming from the rivets. Guess I will be calling Agco dealer tomorrow to see if it’s still available. Both front springs are also broken which surprised me since they worked decent especially the left side. I’m sure they have been dragging which means I need to replace them. My questions are if the drum is still available and what size were the front headlights? I believe WD headlights were put on it at some point. I recently purchased a correct 1959 shroud, 3 bar grill, and headlights. The headlights that came with the shroud measure 6 1/4” across.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Replies:
Posted By: Charlie175
Date Posted: 06 Sep 2022 at 6:45am
|
Walt's tractor has a good price on the drums.
https://www.waltstractors.com/acatalog/UA61270----Brake-Drum---Replaces-70232585-13894.html" rel="nofollow - https://www.waltstractors.com/acatalog/UA61270----Brake-Drum---Replaces-70232585-13894.html
OK has a good assortment of brake parts also https://oktractor.com/zen/index.php?main_page=index&cPath=1_23_89&zenid=ab2d4c9a7600d92582132f9deacbc287" rel="nofollow - https://oktractor.com/zen/index.php?main_page=index&cPath=1_23_89&zenid=ab2d4c9a7600d92582132f9deacbc287
OK tractor has the lights http://oktractor.com/zen/index.php?main_page=product_info&products_id=916" rel="nofollow - http://oktractor.com/zen/index.php?main_page=product_info&products_id=916
I can measure mine and see as they didn't change until the S-IV came out.
-------------
Charlie
'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD
|
Posted By: AC720Man
Date Posted: 06 Sep 2022 at 6:50am
I have lights, it just depends which are factory correct. I’m guessing the bigger set is correct although the smaller WD lights do look good on it.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: AC720Man
Date Posted: 06 Sep 2022 at 7:00am
Thanks Charlie
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: DSeries4
Date Posted: 06 Sep 2022 at 7:32pm
Yes, Series 1 headlights are slightly larger than WD/45 lights.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: AC720Man
Date Posted: 07 Sep 2022 at 7:14am
Thanks Myron. I felt the bigger ones were correct,thanks for confirming that for me.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: Lon(MN)
Date Posted: 07 Sep 2022 at 7:19am
Brake drums are the same as WD or WD45. After market has them. I have several very nice used ones. The correct lights are sealed beam. I have a set for sale. Shop in your area to save on freight cost. Support the local guys.
-------------
http://lonsallischalmers.com
|
Posted By: AC720Man
Date Posted: 07 Sep 2022 at 2:07pm
I got a correct year shroud with lights from a forum member. Very nice and just noticed the lights to be larger than what came on this D17 I bought. I figured the lights on the shroud were correct but just wanted to verify. Obvious now the previous owner put WD lights on it. Just wanting to put it back like it supposed to be. I have a friend that says he has a good used brake drum. Looks like I will be pulling both drop housings off, drum on one side, axle seal replacement and inner pinion shaft seal needs to be replaced on the other side. Ugh…
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|