Pulling Forum - D14 block with d15 series 2 rebuild kit?

Print Page | Close Window

D14 block with d15 series 2 rebuild kit?

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=189960
Printed Date: 25 Apr 2024 at 7:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D14 block with d15 series 2 rebuild kit?

Posted By: BillM
Subject: D14 block with d15 series 2 rebuild kit?
Date Posted: 08 Aug 2022 at 9:30pm

Everything I have read so far says the only difference between a D14 and a D15 series 2 engine is the bore size. Am i correct in this? Wanting to use a D15 (160ci) rebuild kit in a D14 (149ci) block. Will this work or am i missing something?

Replies:

Posted By: steve(ill)
Date Posted: 08 Aug 2022 at 9:52pm

160 has a bigger carb, hi idle is 2000 rpm , i think different intake manifold...

the kits say ...." for SN 9000 and above"...

-------------
Like them all, but love the "B"s.

Posted By: DrAllis
Date Posted: 09 Aug 2022 at 7:34am

Maybe could be done BUT, the sleeves won't fit in the block because they are larger O.D. So, you might be able to bore the block, but the cost might keep you from doing it. Also, the connected rods are different as the piston pin diameters aren't the same.

Posted By: PaulB
Date Posted: 09 Aug 2022 at 7:35am

WON'T WORK without a lot of costly machine work. The 160 sleeves have a larger OD than the 138/149 sleeves.

The only difference in the manifolds is the series II has a threaded exhaust port as apposed the the series I which is smooth.

Send me a PM with your email if you want more help in BIG power from little engines. I have a NOS 160 block available.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
If you can't make it GO... make it SHINY

Posted By: BillM
Date Posted: 09 Aug 2022 at 8:06am

Message sent