Print Page | Close Window

Allis G seals

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=189938
Printed Date: 19 Dec 2025 at 10:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Allis G seals
Posted By: Kiwi
Subject: Allis G seals
Date Posted: 07 Aug 2022 at 6:48pm
Hi all just doing some work on my G replaceing some oil seals and i have destroyed the seals getting them out. would anyone have the sizes and seal number for the ross steering box seal ,main gearbox input shaft seal and the belt pulley seal . I went to my seal supplier in the big smoke today and the numbers I had.
CR9837 steering box seal
450244 national belt pulley seal
50219s national input shaft seal
did not match up with anything . 


-------------
Tractors Allis EB,two C,diesel G



Replies:
Posted By: Mikez
Date Posted: 07 Aug 2022 at 7:08pm
Do you have the Allis Chalmers part numbers. We have a bunch of G parts


Posted By: Bill Long
Date Posted: 07 Aug 2022 at 8:32pm
KiWi,  I was going to suggest Sandy Lake but then remembered you are from "down under"
However, you may be able to contact them.  They are a sponsor of this forum.  They do wonderful work with parts for Allis Chalmers Tractors.
Good Luck!
Bill Long


Posted By: JoeM(GA)
Date Posted: 07 Aug 2022 at 9:00pm
Hey Jeff, don't you just love the new help out there!
I hope this helps!

The Steering box seal
AGCO # (70)800797
CR9837
National seal #350414
O.D. 36.70 mm
I.D. 35.4 mm
thickness 3.35 mm

PTO Gear box
AGCO #(70)800181
CR12530
National Seal # 470244
O.D. 52.476mm
I.D. 31.750 mm
thickness 11.01 mm

Input shaft seal
AGCO (70)800371
CR9934
National #471649
O.D. 41.351
I.D. 25.4
thickness 6.34 mm










-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB


Posted By: Kiwi
Date Posted: 07 Aug 2022 at 9:10pm
Thanks all that is a big help 

-------------
Tractors Allis EB,two C,diesel G



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net