Print Page | Close Window

WD/WD-45 Drawbar Hanger Repair

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=189281
Printed Date: 01 Oct 2024 at 5:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: WD/WD-45 Drawbar Hanger Repair
Posted By: wjohn
Subject: WD/WD-45 Drawbar Hanger Repair
Date Posted: 04 Jul 2022 at 10:01am
What are folks doing to fix worn out wear shoes on the WD/WD-45 drawbar hangers? Just clean it up and weld a similar thickness plate in there with holes drilled? I searched and couldn't find much, other than you can buy complete new drawbar hangers for about $200.

From the AC parts book it looks like they used to sell you 2 new 90 degree wear shoes that you then welded together to form the box that goes around the round part of the hanger.

This one is worn out top and bottom.




-------------
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45



Replies:
Posted By: IBWD MIke
Date Posted: 05 Jul 2022 at 6:18am
Been awhile since I worked on one of these. That one looks like a good candidate for replacement! Good used ones are not real common however. I would think you could make new pieces out of angle iron.


Posted By: wjohn
Date Posted: 07 Jul 2022 at 11:53pm
Angle iron is a great idea. I'll have to measure it and see if it's close to a stock size. If not I'm sure I can trim a little off of the walls if needed. With the welds and the worn shoes, I'd replace the drawbar for $200 if I weren't so dang frugal!

-------------
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45


Posted By: ac fleet
Date Posted: 08 Jul 2022 at 9:05am
cut and weld!


-------------
http://machinebuildersnetwork.com/


Posted By: IBWD MIke
Date Posted: 08 Jul 2022 at 9:16am
wjohn, somewhere, I have a drawbar-bail I was in the process of doing this to. Don't remember if it was for some puller-drawbar or maybe something for a sub-soiler? Could have just been a brain-fart. Will look around the farm this weekend and see if I can find it. Of course, with my memory, odn't hold your breathe.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net