Farm Equipment - How to Remove wd45 hand clutch shaft

Print Page | Close Window

How to Remove wd45 hand clutch shaft

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=189222
Printed Date: 26 Apr 2024 at 4:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: How to Remove wd45 hand clutch shaft

Posted By: dr p
Subject: How to Remove wd45 hand clutch shaft
Date Posted: 30 Jun 2022 at 8:20pm

I have a lot of slop in my hand clutch lever so I pulled the lever. It needs two new bushings but the shaft is badly worn as well and will need to be replaced. I know the shaft is frictional fit. I can get it to spin with a pipe wrench and a cheater bar but anyone got any ideas how to get it out?

Replies:

Posted By: MACK
Date Posted: 30 Jun 2022 at 9:15pm

Pull right frame, weld nut the size of your slide hammer to end of shaft, and pull it out. MACK

Posted By: Lon(MN)
Date Posted: 01 Jul 2022 at 7:27am

I take the shift tower off and pound it out from the inside.

-------------
http://lonsallischalmers.com

Posted By: SteveM C/IL
Date Posted: 01 Jul 2022 at 1:14pm

I had no luck driving out from inside.

Posted By: dr p
Date Posted: 01 Jul 2022 at 7:11pm

Tried Mack's idea and snapped the shaft.

Posted By: dr p
Date Posted: 02 Jul 2022 at 8:39pm

Ended up drilling a 7/16 hole though the shaft near the housing and VERY SLOWLY pulled it out. Took a ray Wylie Hubbard and a Tom h hall CD to get it out. Got advice on putting new one in. Think I will chill it in dry ice

Posted By: SteveM C/IL
Date Posted: 02 Jul 2022 at 11:22pm

have something between it and the hammer or you'll end up swelling the end

Posted By: dr p
Date Posted: 03 Jul 2022 at 6:30am

Thanks everyone