185 PTO trouble
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18917
Printed Date: 07 Feb 2025 at 11:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 185 PTO trouble
Posted By: rich
Subject: 185 PTO trouble
Date Posted: 30 Sep 2010 at 6:38pm
|
It seems something has let loose inside my PTO Housing and cracked the case, all the oil leaked out. I have not yet pulled the PTO housing from the torque housing. I hope the damage is within the PTO housing itself and not something that worked its way down from the torque housing. Anybody ever pulled one of these or know of any parts or tools I might need. I hope we can fix it ourselves, my friend was brush hogging when the PTO broke and was able to drive straight back to the barn. Thanks!
|
Replies:
Posted By: DrAllis
Date Posted: 30 Sep 2010 at 8:09pm
|
There are two "alignment dowels" that need to be slide hammered out before you do anything else. Takes 1/4" NC bolt (gr 8 is best) about 4 inches long so it can go alongside the box and get a slide hammer attached to it and yank them out. After that it's just bolts and hoses/lines.
|
Posted By: rich
Date Posted: 01 Oct 2010 at 5:58pm
|
Dr Allis Thanks for the reply, I saw that info in the manual. Do you have any idea what could have caused this trouble? When I get the problem fixed I don't want it to happen again.
|
Posted By: DrAllis
Date Posted: 01 Oct 2010 at 7:13pm
|
Normally the hydraulic PTO is one thing you never have to work on, so it'll be interesting to see what happened.
|
|