Farm Equipment - Where to find power jet for D15S2?

Print Page | Close Window

Where to find power jet for D15S2?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=189010
Printed Date: 15 Nov 2024 at 6:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Where to find power jet for D15S2?

Posted By: Dean (West MI)
Subject: Where to find power jet for D15S2?
Date Posted: 20 Jun 2022 at 4:43pm

I sent a carburetor off a D15S2, (MS TSX 869 type C) to a rebuild shop and it came back without a power jet. Does anyone know where I can find a power jet?

Part number 70240984?
This place list one, part number 49-159, but when you click on it, the description says it's for a TSX 899, Types A and B. I have a type C.
https://www.carburetion.com/CarbNumber.asp?Number=TSX-869%20" rel="nofollow - https://www.carburetion.com/CarbNumber.asp?Number=TSX-869%20 (237860)

Also 70224061, according to the picture, it's a drain plug with a little valve on it to drain the float bowl.

Replies:

Posted By: plummerscarin
Date Posted: 20 Jun 2022 at 6:07pm

Did the carb shop lose it or you did not one to begin with?
Seems that shop ought to be able to help

Posted By: DrAllis
Date Posted: 20 Jun 2022 at 9:36pm

Power jet from WD45 and D17 with Marvel Schebler carbs would work. I'm sure they are slightly larger hole size (drill #52 or .0625" ) but you should be able to lean it down with the adjustable main jet with the "L" handle.

Posted By: Dean (West MI)
Date Posted: 20 Jun 2022 at 10:43pm

plummerscarin wrote:

Did the carb shop lose it or you did not one to begin with?
Seems that shop ought to be able to help

I purchased a rebuilt carburetor from All States Ag Parts 2-2016. Once I received the carburetor, I returned the old carburetor for a core charge. I installed the new carburetor, but had issues getting it to run properly. So, I parked it in the polebarn until I could look into it more.

Fast forward to 6-2022, the entire fuel system needed attention. I tore down the carburetor and discovered it was missing the power jet. I'm hoping the threads are still there, I'm worried they sent me a carburetor we with bad threads, and that's why they didn't screw in the jet.

I had to go through old emails to piece together what happened.

Posted By: Dean (West MI)
Date Posted: 20 Jun 2022 at 10:44pm

DrAllis wrote:

Power jet from WD45 and D17 with Marvel Schebler carbs would work. I'm sure they are slightly larger hole size (drill #52 or .0625" ) but you should be able to lean it down with the adjustable main jet with the "L" handle.

Thank you. If I can't find the correct jet, I will try your advice.

Posted By: Model 70
Date Posted: 21 Jun 2022 at 9:07am

Check with carbs unlimited they have them, if you want new