Farm Equipment - WC Fender Support Bolts

Print Page | Close Window

WC Fender Support Bolts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18878
Printed Date: 07 Feb 2025 at 12:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WC Fender Support Bolts

Posted By: JCSinPITTS,PA
Subject: WC Fender Support Bolts
Date Posted: 29 Sep 2010 at 12:40pm

I got one long bolt that goes on the front edge of the fender thats bolts to the frame and keeps the fender from rattling, is this a factory thing or something someone added later? If it is a factory part what is the correct measurements becuase the front of the fender is bowed in to the frame like it is too short.

Replies:

Posted By: JCSinPITTS,PA
Date Posted: 29 Sep 2010 at 12:41pm

OOPS!! Unstyled...

Posted By: Lonn
Date Posted: 29 Sep 2010 at 1:07pm

I don't have the measurements but I believe it's factory.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: skipwelte
Date Posted: 29 Sep 2010 at 3:06pm

Yes, the tie bolts to the frame are factory. The keep the fenders from vibrating, especially on the steel wheeled tractors. I too dont have a measurement, most of em got taken off and pitched.

Posted By: David Maddux
Date Posted: 29 Sep 2010 at 4:43pm

Just pull your fender out until it is square with the frame and measure. Both ends are supposed to be threaded if you make one. Dave.

Posted By: AllisChalmers37
Date Posted: 29 Sep 2010 at 8:51pm

They're on mine. Mine is a 1937 Unstyled. I don't know if the earlier WC's or the styled WC's had them.

-------------
1937 WC, 1950 CA, 1959 D14, 1967 190XT, 2006 Ram 3500