Sourcing a H3 Drive Sprocket and Axle(?)
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=188686
Printed Date: 27 Nov 2024 at 6:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Sourcing a H3 Drive Sprocket and Axle(?)
Posted By: Twelve13
Subject: Sourcing a H3 Drive Sprocket and Axle(?)
Date Posted: 05 Jun 2022 at 9:11am
|
Does anyone have a right side drive sprocket and axle (not really sure what to call it, but the part the sprocket bolts to) for a H3?
|
Replies:
Posted By: Tracy Martin TN
Date Posted: 05 Jun 2022 at 9:27am
Eldon in Washington was selling parts. HTH Tracy
-------------
No greater gift than healthy grandkids!
|
Posted By: gemdozer
Date Posted: 05 Jun 2022 at 7:36pm
|
I check tomorrow if am still have a sproket shaft for H3
|
Posted By: Alex09(WI)
Date Posted: 06 Jun 2022 at 9:38am
I was up to an old Allis dealer last weekend that speciallized in the crawlers & dozers. He has lots of parts units and LOTS of NOS allis crawler parts left. He is in the U.P. of Michigan, call Mike @ 906-353-6119
-------------
www.awtractor.com
A&W TRACTOR 920-598-1287
KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY
|
Posted By: gemdozer
Date Posted: 06 Jun 2022 at 12:16pm
|
I check this morning and have a sproket shaft for H3 ,he has 8 holes 5/8 inchs fine tread and found a parts number --43347--
|
Posted By: Coke-in-MN
Date Posted: 07 Jun 2022 at 11:45am
if there is wear at the seal area on axle shaft - a speedy sleeve and oversize seal can be obtained from a bearing supplier to solve that problem
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
Posted By: Twelve13
Date Posted: 07 Jun 2022 at 6:37pm
|
I appreciate all the replies! I am currently in contact with Eldon in WA about it. I will definitely keep that dealer in mind for anything else I might need! I would add a sleeve to the axle, but the axle and sprocket are missing entirely!
|
|