TSX 464 carburetor
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18864
Printed Date: 07 Feb 2025 at 9:23am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: TSX 464 carburetor
Posted By: Rod in MN
Subject: TSX 464 carburetor
Date Posted: 28 Sep 2010 at 10:11pm
|
HI Guys it's been a some time That I was on here I have a WD 45 with TSX 464 carb was full of rust cleaned the best i could with not able to get the nozzle out put it on the tractor but would not run smooth. Tighten up the High Adjusting needle The Threads pulled out. Drilled out the Nozzle out and the Thread are not good they look like 3/8 Fine .Need to know what size nozzle and adj needle are . Has any one ever drill out and Install He-a-coil (not sure on spelling) in the carb to fix the Thraeds . Were can i find a Break down and part numbers
Thank You Rod in MN
|
Replies:
Posted By: Jeff Z. NY
Date Posted: 28 Sep 2010 at 10:53pm
|