RC V-belt
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=188186
Printed Date: 27 Apr 2024 at 6:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: RC V-belt
Posted By: Wot
Subject: RC V-belt
Date Posted: 11 May 2022 at 12:57am
|
Hello, What would be the correct Gates number tot replace my V-belt (without generator) Guess it will be the same as a B without generator? I found number 22320, but don't know if that is correct. Thanks!
|
Replies:
Posted By: PaulB
Date Posted: 11 May 2022 at 6:32am
|
Yes: That is the correct belt for RC, B, C tractors & 125 Power units without a generator. ------------- If it was fun to pull in LOW gear, I could have a John Deere. If you can't make it GO... make it SHINY |
Posted By: Wot
Date Posted: 13 May 2022 at 12:33am
| Thanks! Another question, my throttle works not the same as my B, towards engine is idle. Is that normal on the RC? |
Posted By: AaronSEIA
Date Posted: 13 May 2022 at 5:45am
I'd assume so. Thats how a WC is set up. AaronSEIA
|
Wot wrote:Posted By: WD45Diesel57
Date Posted: 27 May 2022 at 7:40am
thats the way my RC works as well, it think it has to do with the location of the throttle rod in relation to the lever! i think the RC is mounted above the pivot point and the B and C are located below the pivot point of the lever! In which will change the action of the lever! I could be wrong id have to double check my RC with the B ------------- 1-B's, 2-C, 2-CA's,2-WF, 1-WC,1-G, 3-WD's, 2-WD45, 1-RC, 1-D17 Diesel, 1-D14, 2-D15,1-D17 row crop,1-D19 gas and All Crop 40,60,66,72,90 and 100 |