Construction and other equipment

Print Page | Close Window

M100 grader

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=188146
Printed Date: 27 Nov 2024 at 6:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: M100 grader

Posted By: jhedmonton
Subject: M100 grader
Date Posted: 09 May 2022 at 12:09am

Just bought a M100 grader! Works well but after a couple uploads/23019/20220507_190415sm.jpg" rel="nofollow - uploads/23019/20220507_190415sm.jpg hours of work the front steering hydraulic leaks badly. Are the seals/gaskets still available, if so where?

THANKS

Replies:

Posted By: SteveM C/IL
Date Posted: 09 May 2022 at 9:03am

Is the hose tight? Can't tell from picture where it's leaking.

Posted By: jhedmonton
Date Posted: 09 May 2022 at 11:50am

Hose is tight, leaking right behind that bolted front plate. Thanks!

Posted By: SteveM C/IL
Date Posted: 10 May 2022 at 2:52pm

Looks like a Shepard gear. I think there is an oring on the cap. You could match it up at a hyd shop. I don't think you can screw up anything just pulling cap. Been a long time since I had one apart.

Posted By: Codger
Date Posted: 10 May 2022 at 3:05pm

Start here: https://www.rhsheppard.com/" rel="nofollow - https://www.rhsheppard.com/

They used to have a very good technical support staff willing to help with older steering gear.

Posted By: jhedmonton
Date Posted: 10 May 2022 at 3:10pm

THANKS!!