FP50-24 Forklift Carburetor
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=188087
Printed Date: 27 Nov 2024 at 6:36pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: FP50-24 Forklift Carburetor
Posted By: cmsmoke
Subject: FP50-24 Forklift Carburetor
Date Posted: 06 May 2022 at 6:36am
| Want to convert my originally gasoline powered forklift from lpg back to gasoline. Does anyone have or can recommend a carburetor that would work properly? I don’t use this machine much and right now it needs the supply hoses replaced. I’m not happy with the lpg conversion as it is a propane hog and lacking in power. It is an old universal lpg conversion that I can’t even find the name of. I did find information on how to adjust a similar system and have it set up as good as it is going to get. The engine compression is good and it is tuned properly. Does anyone have a suggestion? |
Replies:
Posted By: steve(ill)
Date Posted: 06 May 2022 at 8:58am
your tractor should have a G153 motor .........  ------------- Like them all, but love the "B"s. |
Posted By: jaybmiller
Date Posted: 06 May 2022 at 9:05am
|
G153 is a 'Buda' engine, same as in Cockshut30 farm tractors, might be an optional source for a carb ? My forklift has the BD153 in it (diesel) and I bought comlete running '30' with the intent to replace the 'ultra low compression' diesel with gas. it was going to be a long , 'slugfest' ordeal so I passed.. Yikes $400 for JUST a carb ?? ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: cmsmoke
Date Posted: 06 May 2022 at 4:48pm
| The one I would need is $480…Lol! I want to find a used one. |
Posted By: im4racin
Date Posted: 06 May 2022 at 6:18pm
| I want to do the same thing to mine. I would gladly pay 480 for a new if it had the right throttle linkage on it |
Posted By: steve(ill)
Date Posted: 06 May 2022 at 7:26pm
|
the "14991" listed for the "OLD 153" does not seem right ($480) ... That same carb fits the 226 and 230 inch motors ??? That cant be right. ........... i would call and ask whey the 12566 would not work ($380.) ------------- Like them all, but love the "B"s. |
Posted By: cmsmoke
Date Posted: 06 May 2022 at 8:26pm
|
I won't pay almost $500 for any single barrel carburetor. If I used this everyday, it would be a different story, but sometimes it will sit for a couple months. I'm looking for a used one in the 153 cubic inch range that has an adjustable main jet that is horizontal, has the right bolt centers and has the linkage on the correct side. I found several candidates this afternoon. |
Posted By: steve(ill)
Date Posted: 06 May 2022 at 9:01pm
|
Tony, i did the same thing several months ago... I have bought China carburetors for chainsaws and gocart engines that worked fine.... Figured they MIGHT do OK on larger carbs ???..... I was considering changing the carb on a CASE Backhoe of 159 cubic inch engine... Looked on e-bay and found a couple "china" version for old IH or FORD tractors in the 160 CID range........never did pursue past LOOKING.
------------- Like them all, but love the "B"s. |
Posted By: cmsmoke
Date Posted: 06 May 2022 at 10:50pm
| Same here with the small engines. I hate to buy china, but no customer complaints. I have no problem modifying a carb to work. An adjustable main will make it easy. |
Posted By: steve(ill)
Date Posted: 06 May 2022 at 11:00pm
|
i have noticed there are about 3-4 main "sizes" of carburetors... Like a "B" will not fit a "WD45" manifold... Bolt pattern and throat diameter are different... Might have one size SMALL that goes on motors up to 150 CID.... a MEDIUM might fit 140 - 200 cid... a LARGE might be over 200 cid ... etc.... Obviously a "MEDIUM" body that fits a 140 cid or a 200 cid engnine will need different JETS inside... but the BODY is the same SIZE... get that right, bolt up pattern and throat diameter. ------------- Like them all, but love the "B"s. |
Posted By: Joe(TX)
Date Posted: 30 May 2022 at 7:44pm
|
It could also use a Marvel Schebler TSX670, TSX701, TSX815 TSX844 from a D15 ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |