D21 clutch replacement
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=188042
Printed Date: 01 Jul 2024 at 3:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D21 clutch replacement
Posted By: WLHD21
Subject: D21 clutch replacement
Date Posted: 03 May 2022 at 9:33pm
|
Has anyone had luck rolling the back half of the D21 away from a blocked and supported front half? Or is it best to remove radiator, front end casting and frame rails as called out in IT manual? |
Replies:
Posted By: MACK
Date Posted: 03 May 2022 at 9:41pm
| Best to role engine and front end forward. MACK |
Posted By: WLHD21
Date Posted: 03 May 2022 at 9:56pm
|
The concert that I see is that the frame rails do not connect to engine plate and the splitting stands I have will not support the engine, I will use an overhead hoist Connected to engine to move the front half forward. Thanks |
Posted By: SteveM C/IL
Date Posted: 03 May 2022 at 11:11pm
| Splitting stand I used on 8070,I blocked across stand rails and put jack under oil pan to support engine with frame rails. |
Posted By: MACK
Date Posted: 04 May 2022 at 7:19am
| A wood block under oil will easily support the weight of motor. MACK |
Posted By: Fred in Pa
Date Posted: 04 May 2022 at 4:31pm
This is what I use alot .On 190 200 180 etc . I got bolts with heads cut off run them bach throught engine plate n side rail and use overhaed gantry   ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |