MF broken in half
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18798
Printed Date: 07 Feb 2025 at 12:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: MF broken in half
Posted By: Jeff-in-Kunkletown
Subject: MF broken in half
Date Posted: 27 Sep 2010 at 10:13am
|
This guy had a hydraulic failure with a 6200 MF while going down the road. Ouch |
Replies:
Posted By: Jeff-in-Kunkletown
Date Posted: 27 Sep 2010 at 10:13am
|
Posted By: Jeff-in-Kunkletown
Date Posted: 27 Sep 2010 at 10:15am
|
Posted By: CJohnS MI
Date Posted: 27 Sep 2010 at 10:23am
| OMG! |
Posted By: Gerald J.
Date Posted: 27 Sep 2010 at 10:26am
|
That's from a couple years ago and been discussed over on new ag talk. There are suppositions all over, including a kid playing with the loader while the new owner was flying down the road. The only faster stop would have been hitting a wall so there should have been injuries inside the cab. Gerald J. |
Posted By: Charlie175
Date Posted: 27 Sep 2010 at 11:05am
|
will the warranty cover that? ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: DREAM
Date Posted: 27 Sep 2010 at 2:43pm
|
Man, that is Kuh-razy screwed-up!
See, I been tryin to tell ya'll them MFs were no good!LOL!
Seriously, I would imagine there were some pretty serious injuries. I don't think you could tear one up that bad if you backed it into a wall and ran into it with a D-9 Cat. I sure do hope it wasn't somebody's kid that let the loader down and did that. Bad enough for grown folks to get messed up, hate to think about what would happen to a child sitting on the armrest or in daddys' lap.
|
Posted By: NickT(Ky)
Date Posted: 27 Sep 2010 at 2:44pm
| Gerald, I remember seeing this too. The kid was blamed and there was a heavy trailer in tow. |
Posted By: DREAM
Date Posted: 27 Sep 2010 at 2:47pm
| Hmm, I just noticed the windshield seems to be intact. Back window is gone. Kinda figured it would be the other way around. I don't see how anyone could have stayed in there with that kind of impact, unless they were wearing the seatbelt. Most folks don't. |
Posted By: DREAM
Date Posted: 27 Sep 2010 at 2:49pm
| Nick, that would explain the damage to the back end. I hope junior and dad were OK. |
Posted By: Gerald J.
Date Posted: 27 Sep 2010 at 3:53pm
|
Probably it had drifted down as loaders like to do from vibration at the valve and pulled for up and then pulled on past to float. Boom! Gerald J. |
Posted By: Jim Lindemood
Date Posted: 28 Sep 2010 at 7:33am
| That would sure ruin one's day. Was probably a big job to get it removed. |
Posted By: NEJim
Date Posted: 28 Sep 2010 at 8:04am
| Looks like the 3 pt is OK...... |
Posted By: Andrew(southernIL)
Date Posted: 28 Sep 2010 at 8:26am
|
Looks like the grapple saved it from flipping on over.Now that would make you shat yo britches. Must have had the seat belt on unless was puckered to the seat.
------------- If fishing is a sport your looking at an athlete |
Posted By: john(MI)
Date Posted: 28 Sep 2010 at 10:09am
|
Reminds me of a broncin buck!!! ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: jeffnil
Date Posted: 28 Sep 2010 at 10:25am
| My father always said to tilt up the bucket when going down the road, might have made a difference here |
Posted By: Spud
Date Posted: 28 Sep 2010 at 6:16pm
|
I can believe the youngster explanation.
I was test driving a challener 600 series a few years ago with an offset disc in the ground and my young fella on my lap (thought it was safe inside a cab tractor). Him being about 14 months old and wanting to grab everything, he reached up and grabbed the fwd/rev lever and flipped it into neutral. It stopped in a hurry with that big disc in the ground. Salesman fell out of the instructor seat and I got the steering wheel in the gut. Young fella didn't hit anything and probably thought it was all in good fun!
|
Posted By: redline
Date Posted: 28 Sep 2010 at 6:52pm
|
They also said over on New Ag Talk "That'll buff out!"
The cutting edge on the loader sure took a big bite out of the road. ------------- If it weren't for the last minute, I wouldn't get anything done! |
Posted By: BCPuller
Date Posted: 28 Sep 2010 at 7:05pm
| Looks like if fell the train car on its way to dealer. |
Posted By: EricTn
Date Posted: 28 Sep 2010 at 7:19pm
| I know a man that was going down a paved road on a 3000 Ford with loader with hay spear. The neighbors dog was chasing tractor so he thought he would scare it by bumping the bottom of the spear frame on the pavement. Well, he didnt realize the spear was tilted down and it was. It went into the pavement and he experience the sudden stop syndrome. Woe!!! Gut met the steering wheel. Bent the spear, nothing broke. Bet the dog got a kick out of that! |
Posted By: Dave(inMA)
Date Posted: 28 Sep 2010 at 9:28pm
|
After reading Eric's post, there's something to be said for leaving well enough alone.... ------------- WC, CA, D14, WD45 |
Posted By: Alberta Phil
Date Posted: 29 Sep 2010 at 9:50am
| Would make an interesting piece of "yard art"!! LOL |
Posted By: redline
Date Posted: 29 Sep 2010 at 11:46pm
|
I think you could get more of them on a truck load when they are piled up like that. Look at the shipping costs that could be saved!
------------- If it weren't for the last minute, I wouldn't get anything done! |
Posted By: Larry in OK
Date Posted: 30 Sep 2010 at 7:00am
|
Something like that could spoil your whole day.
------------- Some people are like Slinkies. Not really good for much of anything but they still bring a smile to your face when you push them down a flight of stairs. |
Posted By: DonDittmar
Date Posted: 30 Sep 2010 at 7:42am
|
If that was done right, the loader would have broke off the tractor instead of the tractor breaking in half Strong built loader, piss poor built tractor ------------- Experience is a fancy name for past mistakes. "Great moments are born from great opportunity" 1968 D15D,1962 D19D Also 1965 Cub Loboy and 1958 JD 720 Diesel Pony Start |