Construction and other equipment - K crawler steering clutches

Print Page | Close Window

K crawler steering clutches

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187724
Printed Date: 27 Nov 2024 at 7:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: K crawler steering clutches

Posted By: Bob (IN)
Subject: K crawler steering clutches
Date Posted: 16 Apr 2022 at 11:20pm

I am getting ready to replace the steering clutches in my k crawler and was wondering if anyone had information on the procedure to do so Thanks

-------------
great-grandpa's wc with picker, 20/35, speed patrol, uc, m crawler, 620, 653 dozer d21 d17 d19

Replies:

Posted By: Ray54
Date Posted: 17 Apr 2022 at 9:34pm

I never been in one of them, but always told the same as HD 7 with the 3 cylinder Detroit Diesel being the difference.

Wild guess from other crawlers of that vintage is both the steering clutches and bevel gear all comes out together.

Look and see if General Gear has any service manuals for a K or HD7 on there web site.

Posted By: CAL(KS)
Date Posted: 18 Apr 2022 at 7:16am

On the HD10, bevel does not come out but one pinion has to be removed so the bevel shaft can slide over for removal of opposite side. bevel is splined to short shaft but runs on bearings separate from shaft. i believe HD7 is similar

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15

Posted By: everett048
Date Posted: 18 Apr 2022 at 10:35am

I have done steering clutches on a k pm me