Farm Equipment - 6080 water pump

Print Page | Close Window

6080 water pump

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187368
Printed Date: 20 Oct 2025 at 6:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6080 water pump

Posted By: Mikez
Subject: 6080 water pump
Date Posted: 30 Mar 2022 at 5:21pm

Hi all.

This might be a silly question.

We put new water pump on which I think was a hi-capacity I believe the one that came off was also hi-capacity. So I came across agco rebuild kits. The question is can you rebuild the hi capacity housing with original agco rebuild kits.

Thanks

Replies:

Posted By: Albert
Date Posted: 30 Mar 2022 at 6:58pm

It looks like the kits are no longer serviced by AGCO but there may be some around

To answer your question yes the kit will be fine.

Albert

Posted By: Mikez
Date Posted: 30 Mar 2022 at 7:15pm

I have two kits on the shelf. Thanks Albert

Posted By: MACK
Date Posted: 30 Mar 2022 at 8:43pm

If you never rebuilt one, better have some help from some one that has. One mistake and you don't even have a core. MACK

Posted By: tbran
Date Posted: 31 Mar 2022 at 2:11pm

one has to cut the brg shaft and PRESS everything out , usually w/heat. Pulling the hub and pressing out the brg 90% results in broken cast housing and warped hub. Failure to press on the hug and impeller to the exact dimension = failure.

-------------
When told "it's not the money,it's the principle", remember, it's always the money..

Posted By: Mikez
Date Posted: 31 Mar 2022 at 6:57pm

Thanks guys. The guy doing it has done other water pumps. Not 6080 though