190XT clutch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187245
Printed Date: 22 Aug 2025 at 10:36pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190XT clutch
Posted By: NDBirdman
Subject: 190XT clutch
Date Posted: 24 Mar 2022 at 5:22pm
|
Fired up the 190 today to remove the snowblower and put her up for the summer. This time I paid attention, well, a little.. LOL Anywayz, the clutch, put foot on it to disengage, I don't push it in, just touch it and PTO disengages. Then I noticed while backing, just barely touch clutch and she stops. I've betting it needs adjusted, should not be that touchy. How much play should I have before it disengages/engages, is it easy to adjust? Never messed with the 190 clutch. ------------- 1955 WD45 S#205467, 190XT #6652 DXT |
Replies:
Posted By: John m
Date Posted: 24 Mar 2022 at 5:36pm
| I believe my manual says 2 inches of freeplay at the pedal. Adust mine on left side between steering console and engine. Pull the cotter pin and remove pin. Lengthin or sharten as needed. Adjustment rod has a large spring on it, easy to spot. |
Posted By: DrAllis
Date Posted: 24 Mar 2022 at 5:48pm
| Minimum 2 inches....4 is better as long as you can shift gears |
Posted By: NDBirdman
Date Posted: 24 Mar 2022 at 6:01pm
Thanks, I'll definitely do that soon! I bet that was why when I backed into heavy snow, the blower would stop and tractor would not move. My only problem, and I seriously hope, is no snow to try her out on again until next fall.  ------------- 1955 WD45 S#205467, 190XT #6652 DXT |
Posted By: John m
Date Posted: 24 Mar 2022 at 8:14pm
| Well I got about 3 1/2 feet in my front yard you can have. For free. Lol |