Construction and other equipment

Print Page | Close Window

D grader starter

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187242
Printed Date: 15 Nov 2024 at 9:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D grader starter

Posted By: ac fleet
Subject: D grader starter
Date Posted: 24 Mar 2022 at 1:38pm

Will a starter from a WD tractor fit the grader motor? Trying to get mine to work and starter is history inside,--burned up bad.

My D is still on 6-volt system and is a 1950.

-------------
http://machinebuildersnetwork.com/

Replies:

Posted By: PaulB
Date Posted: 24 Mar 2022 at 6:09pm

Yes a WC, WD & WD45 starter will fit and work, however those starters will have a Lever type switch instead of a post to use the solenoid. You'll just have to lift up the seat to use the lever unless you Grader already has linkage for the lever type switch.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: ac fleet
Date Posted: 25 Mar 2022 at 12:29pm

Thanks Paul! I think I have 1 starter that does have just the post. will check that and if needed I can lift seat to use the starter,--- no problem for me! lol!

-------------
http://machinebuildersnetwork.com/

Posted By: Joe(TX)
Date Posted: 30 May 2022 at 7:48pm

The WD starter can be converted to a solenoid operation. My WD has been.

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A