Classifieds - Looking for All-Crop part

Print Page | Close Window

Looking for All-Crop part

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187196
Printed Date: 30 Apr 2025 at 3:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Looking for All-Crop part

Posted By: TomYaz
Subject: Looking for All-Crop part
Date Posted: 22 Mar 2022 at 6:40am

Hello All,

Looking to make new tailing doors but what I got as a pattern are all mangled up. No time time to wrench off a new donor from the parts machines.

Anyone have one that is not screwed up?

Tom

-------------
If its not an All-Crop, it all crap!

Replies:

Posted By: WF owner
Date Posted: 23 Mar 2022 at 6:25am

I'm not very familiar with combines. Are the "tailing doors" you talking about the flip up door where the straw comes out of the machine?

If so, I have a very good one from 60.

Posted By: TomYaz
Date Posted: 23 Mar 2022 at 6:32am

No, its the clean out door on the very bottom of the tailings return elevator. Right next to the tank side tire.

-------------
If its not an All-Crop, it all crap!

Posted By: WF owner
Date Posted: 23 Mar 2022 at 7:05am

I just went out and looked. it looks like the PO (who bought the combine new) fabricated a new door out of galvanized roof steel. Sorry!

I am going to send the old combine for scrap. Is there anything anybody needs for parts. It had an engine (which is what I bought it for) and the cutterbar guards are gone. Everything else is there and in pretty fair shape.

Posted By: TomYaz
Date Posted: 23 Mar 2022 at 7:17am

Slip clutch/sprocket on the seperator drive shaft is precious, as are most housings for the bearings...but lot of work to take that all off and probably not worth your time.

Any screens?

-------------
If its not an All-Crop, it all crap!

Posted By: dr p
Date Posted: 26 Mar 2022 at 8:20pm

Tom, do you still need it?. I will be at the storage barn and grab one sunday

Posted By: TomYaz
Date Posted: 27 Mar 2022 at 2:47pm

Hi Doc,

Creston said he would send me one, if it falls thru I will look you up.

Thanks!

Tom

-------------
If its not an All-Crop, it all crap!

Posted By: CrestonM
Date Posted: 02 Apr 2022 at 5:08pm

Tom, you might check with him. I looked at my combine, and I didn’t realize the door was homemade. It looks original, but the piece of steel they cut it out from is so long that it runs about a quarter of the way up the elevator. I didn’t realize this, and the screws that hold it to the wood are machine screws, and there’s no way I can get a flat head up inside the elevator without taking it all apart.

Posted By: TomYaz
Date Posted: 02 Apr 2022 at 7:00pm

Ok Creston, thanks

-------------
If its not an All-Crop, it all crap!

Posted By: TomYaz
Date Posted: 02 Apr 2022 at 7:00pm

Ok Doc,

Looks like I will be needing that door if you can.

Thanks

Tom

-------------
If its not an All-Crop, it all crap!