Print Page | Close Window

D14 Flywheel

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187104
Printed Date: 21 Aug 2025 at 11:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: D14 Flywheel
Posted By: DSeries4
Subject: D14 Flywheel
Date Posted: 17 Mar 2022 at 5:43pm
Does anyone have the torque spec for the flywheel bolts on a 1960 D14? Couldn't find anything in my service manual.

D14 #3 getting new front and rear seals. Same clutch assembly going back in - lots of meat left on it. The hour meter showed 2700 hours when I got it last summer, I think it's pretty close. Can't find any wear on that tractor at all! Clutch pedal, drawbar, ring gear, front axle all good as new! One of my best buys!


-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080



Replies:
Posted By: DiyDave
Date Posted: 17 Mar 2022 at 6:12pm
If someone who has a shop manual doesn't chime in, you can always go back to basics, and consult a torque table:

https://www.dultmeier.com/pdfs/tech-library/C_BoltTorque.pdf" rel="nofollow - https://www.dultmeier.com/pdfs/tech-library/C_BoltTorque.pdf


-------------
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net