Pulling Forum - How wide is to wide

Print Page | Close Window

How wide is to wide

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187031
Printed Date: 23 Nov 2024 at 5:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: How wide is to wide

Posted By: blazen orange
Subject: How wide is to wide
Date Posted: 14 Mar 2022 at 6:24pm

Putting a set of rims together for 18.4 38 tires and was hoping to some info on rim width for best results thanks

Replies:

Posted By: brad7066
Date Posted: 14 Mar 2022 at 10:12pm

what worked best for me was if its a 16.9 16 inches 18.4 18 inch rim. was told that on a deep tread radial you could go a inch wider. also it may differ if you are pulling in light weight classes.

Posted By: blazen orange
Date Posted: 15 Mar 2022 at 6:40am

The tires Firestone sat ll for a 8000 lbs class.

Posted By: PaulB
Date Posted: 15 Mar 2022 at 6:57am

Last summer I was using a friends set of 18.4X38 tires mounted on 20" rims. In my opinion I though that was too wide. The rims I made for my own 18.4X38s turned out to be 17" and that seems to work well. I noticed that even with very high pressures the 20" rim allowed the tread to rise up in the middle of the dig outs at the end of the pull.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY