190XT_cowel fasteners
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187006
Printed Date: 23 May 2024 at 2:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190XT_cowel fasteners
Posted By: 190 driver
Subject: 190XT_cowel fasteners
Date Posted: 13 Mar 2022 at 1:32pm
Does anyone know of a source for the correct screws and u-nuts for the cowel (agco parts books call is a shroud) around the dash on an XT? I don't see anything listed in the parts books. Most anything will work but checking in here as someone usually has the answer.
|
Replies:
Posted By: John m
Date Posted: 13 Mar 2022 at 4:02pm
|
I'm sure Sandy Lake Implement (one of the sponsors) can get them for ya. Give em a call and good luck.
|
Posted By: AC720Man
Date Posted: 13 Mar 2022 at 8:15pm
They strip pretty easily. When I redid my XT I went to my local hardware store and picked up 1/4”x20 blind nuts and 1/4”x20x3/4” bolts. Stainless steel won’t rust nearly as quickly and has a nice shine to them. Worked sweet, that was 5 years ago and they still look great. Flat washer on the outside of the cowl, and a lock washer to keep it from vibrating loose.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: Joe(TX)
Date Posted: 13 Mar 2022 at 9:32pm
Mcmaster Carr has the clip nuts
-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A
|
|