Print Page | Close Window

Wd Hydraulics

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18693
Printed Date: 07 Feb 2025 at 6:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Wd Hydraulics
Posted By: fixer1958
Subject: Wd Hydraulics
Date Posted: 25 Sep 2010 at 8:28am
First off, I picked up a V-belt pulley assembly that replaces the wide belt pulley. I guess they used them on the WC from what I understand. I don't think it was ever used from the looks of the drive gear. Looks like it takes a 5/8 belt.
 
I considering using that pulley to drive a pump for the 3 point and remove the factory hydraulics all together. Change the cylinders to low pressure/high volume and block off the pump hole.
 
The reason being is my OE pump is about wore out anyway..
 
The question is....What should pump volume be for just those 2 cylinders?
Im thinking about 5 gpm. Don't know if that is enough or not.
What do you think? 


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net