Forklift ID
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=186485
Printed Date: 27 Nov 2024 at 8:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Forklift ID
Posted By: Forkus
Subject: Forklift ID
Date Posted: 17 Feb 2022 at 3:37pm
|
Hi will someone please help id this forklift and engine, on the left rear of block 160-18251-R And the id tag on machine has I 500 8 87 and nothing more I would post pics but site says their to big sorry Thanks |
Replies:
Posted By: jaybmiller
Date Posted: 17 Feb 2022 at 3:49pm
|
Not being cruel but... TELL you 'smartphone' to take 'smaller' pictures, how ?, is your fun task....800x600 pixels is nice, anything less than I think <2MB is OK. I upload pictures to MY 'folder' space in the 'member control panel' THEN when I post a topic, grab them from there and NOT directly from my PC. works everytime... ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: steve(ill)
Date Posted: 17 Feb 2022 at 4:22pm
|
Charles, i sent you my e-mail address. Send me your photos and i will post for you. If you can download your photos to your computer, then open with PAINT and RESIZE to 800 x 600 and then you can post them... As JAY said, most new phones take photos about 3000 x 2000 pixels and that is 4-5 MEG of data..... Too big for a lot of sites that dont "auto resize".
------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 17 Feb 2022 at 4:25pm
|
The "160" on the block makes me think it is a D15 size motor. Your fork truck is more of a "farm tractor size) with BIG wheels on the front end, and not a forktruck limited to concrete use ??
something like this ??  ------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 20 Feb 2022 at 12:29pm
Photos from Charles   ------------- Like them all, but love the "B"s. |
Posted By: jaybmiller
Date Posted: 20 Feb 2022 at 1:41pm
|
9 87 ? Made September of 1987 ?? ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: DiyDave
Date Posted: 20 Feb 2022 at 6:23pm
If 987 is the serial #, its smack in the middle of production for 1970, per Swinford's construction book...  ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
jaybmiller wrote:Posted By: jaybmiller
Date Posted: 20 Feb 2022 at 6:31pm
|
hmm wonder why the gap between 9....... 87 ? did the stamper guy sneeze just then  ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: PaulB
Date Posted: 20 Feb 2022 at 7:21pm
|
at least they're all right side up ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: DiyDave
Date Posted: 20 Feb 2022 at 8:02pm
Because they were stamped by a human, give him a break, it might have been after a long weekend! ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: jaybmiller
Date Posted: 21 Feb 2022 at 6:33am
|
I was hoping there wasn't a missing number between the 9 and the 87 that'd cause a lot of cornfusion...as in ordering parts for it.....  My Buda 4BD153 can have either a 3 or 4 set of rings.no way to tell from the outside... ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Forkus
Date Posted: 23 Feb 2022 at 9:56am
| So does anyone know what this engine is ? Maybe an ac 160 and again the serial number is 160-18251-R |
Posted By: steve(ill)
Date Posted: 23 Feb 2022 at 9:59am
|
Yes, you engine is a 160 cubic inch... Same motor ( and other parts) used in the D15 Farm Tractor..
https://www.tractordata.com/farm-tractors/005/0/4/5042-allis-chalmers-d15-series-ii-engine.html" rel="nofollow - https://www.tractordata.com/farm-tractors/005/0/4/5042-allis-chalmers-d15-series-ii-engine.html ------------- Like them all, but love the "B"s. |
Posted By: Forkus
Date Posted: 23 Feb 2022 at 5:39pm
|
So I finally have a positive id on this engine It is a G160 Allis Chalmers engine,this one was in a 500 series forklift. Which I am bringing back to life , complete rebuild etc. Thanks for all the help! |