Farm Equipment - AC 6080 PTO

Print Page | Close Window

AC 6080 PTO

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=186465
Printed Date: 08 Sep 2025 at 2:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: AC 6080 PTO

Posted By: ssefick
Subject: AC 6080 PTO
Date Posted: 16 Feb 2022 at 6:56am

Hello All:

Note: I have not received my manuals yet.

I have 2 questions related to the pto.

1. The pto connect/disconnect pin is on order. Any gotchas about installation?

2. Button stuck on pto clutch lever. Any thoughts? Sprayed pb blaster to see if this s rust related. Did not work.

I will break in to all of this weekend. I hope. Thought I would ask in preparation in case y'all had some thoughts/advice.

Thank to everyone.

Replies:

Posted By: Mikez
Date Posted: 16 Feb 2022 at 11:52pm

no help to your questions.

But the way I understand it. If your using tractor for non pto work you leave the handle on right forwards and the lever next to seat to left in floor down which is disconnected.

If you want pto use. If it’s a cold start where tractor has sat for a bit. You start tractor with levers in the above description. Let warm up. Shut tractor off you pull left lever up out of floor and pull hand clutch on right back. Start tractor and operate pto with right hand lever.