D15/I600 questions & parts wanted
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=186447
Printed Date: 10 Sep 2025 at 4:17am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D15/I600 questions & parts wanted
Posted By: Thad in AR.
Subject: D15/I600 questions & parts wanted
Date Posted: 15 Feb 2022 at 5:56am
I just bought a I600 backhoe. Looking for a tuneup kit. Points plugs n such? What weight oil is recommended? I’m led to believe it uses tha same oil filter as my old Ford truck? Ph8a. Where could I find manuals for this? Tractor, hoe and loader? Is it worth a electronic ignition upgrade? Not a show piece but a worker.
|
Replies:
Posted By: Gary
Date Posted: 15 Feb 2022 at 4:20pm
I600 has a 160 cu.in. engine same as a D-15 Series II.
You can get ignition parts from NAPA.
G
https://www.tractordata.com/industrial-tractors/000/0/8/85-allis-chalmers-i600-engine.html" rel="nofollow - https://www.tractordata.com/industrial-tractors/000/0/8/85-allis-chalmers-i600-engine.html
|
Posted By: Thad in AR.
Date Posted: 15 Feb 2022 at 8:45pm
I asked the young guy at Napa today and all I got was a funny look.
|
Posted By: Thad in AR.
Date Posted: 16 Feb 2022 at 5:01am
Also hunting an air filter or an air filter number.
|
Posted By: JoeM(GA)
Date Posted: 16 Feb 2022 at 5:25am
Thad in AR. wrote:
Also hunting an air filter or an air filter number.
|
Thad, Wix site says 42276 for the air (2276 at NAPA)
FYI, I have a PDF of the I600 parts book you’re welcome to, I’ll shoot a download link to your email in a bit
Joe
------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB
|
Posted By: Thad in AR.
Date Posted: 16 Feb 2022 at 5:48am
Posted By: Jim.ME
Date Posted: 16 Feb 2022 at 5:51am
Delco distributor with the cap held on by two screws? If so the following Standard Motor Products part numbers should work. NAPA can cross these to Echlin, they are common items.
Cap DR437 Rotor DR 314 Condenser DR 60 Contact Points DR2240
|
Posted By: Thad in AR.
Date Posted: 16 Feb 2022 at 6:12am
Jim.ME wrote:
Delco distributor with the cap held on by two screws? If so the following Standard Motor Products part numbers should work. NAPA can cross these to Echlin, they are common items.
Cap DR437 Rotor DR 314 Condenser DR 60 Contact Points DR2240
| Delhi distributor cap held on with 2 spring clips.
|
Posted By: Jim.ME
Date Posted: 16 Feb 2022 at 6:23am
Delco with two clips I could help you with Delhi I have no idea. Any identifying numbers on it? Can you post a picture of it with the cap off to show the points and condenser, that might help?
|
Posted By: Thad in AR.
Date Posted: 16 Feb 2022 at 6:52am
Jim.ME wrote:
Delco with two clips I could help you with Delhi I have no idea. Any identifying numbers on it? Can you post a picture of it with the cap off to show the points and condenser, that might help? | Delco, apparently spell check doesn’t like them.
|
Posted By: Jim.ME
Date Posted: 16 Feb 2022 at 7:09am
Here are the SMP numbers for the common Delco two clip cap distributor:
Cap DR 405 Rotor DR 321 Condenser DR 60 Contact Points DR 2227P
|
Posted By: Thad in AR.
Date Posted: 16 Feb 2022 at 7:38am
Jim.ME wrote:
Here are the SMP numbers for the common Delco two clip cap distributor:
<div style="color: rgb0, 0, 36; : rgb254, 252, 212;">Cap DR 405 <div style="color: rgb0, 0, 36; : rgb254, 252, 212;">Rotor DR 321<div style="color: rgb0, 0, 36; : rgb254, 252, 212;">Condenser DR 60<div style="color: rgb0, 0, 36; : rgb254, 252, 212;">Contact Points DR 2227P |
Thank you very much sir. I truly appreciate you.
|
|