wear blocks
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18618
Printed Date: 07 Feb 2025 at 6:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: wear blocks
Posted By: Don(MO)
Subject: wear blocks
Date Posted: 23 Sep 2010 at 6:06am
|
I can't find the chain wear blocks for my "A" combine, I don't seam to look in the right places.
Don
-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
Replies:
Posted By: Skyhighballoon(MO)
Date Posted: 23 Sep 2010 at 7:35am
Don - did you forgot to put your glasses on????? LMAO! Mike
-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers
|
Posted By: Good
Date Posted: 23 Sep 2010 at 8:37am
I made some for our massy baler out of hard wood and used band saw.
-------------
B212,716,two 314H's,WC,WD,D19,190XT
|
Posted By: Clay
Date Posted: 23 Sep 2010 at 8:57am
|
Maple or white oak work quite well.
|
Posted By: LannyMTN
Date Posted: 23 Sep 2010 at 9:16am
|
Replace them with the sprocket idlers that have a bearing in the center. Runs much quieter and last longer, also. Available at TSC .
|
Posted By: Skyhighballoon(MO)
Date Posted: 23 Sep 2010 at 10:06am
Lanny...good suggestion...may look into that on my EIII....Mike
-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers
|
Posted By: Don(MO)
Date Posted: 23 Sep 2010 at 6:25pm
|
I found the blocks on a old two row corn head off a "E" that is sitting here. LOL
I did think about just changing them to a sprocket type idler, I was just wanting to keep it like it came out from the factory, I'll just get the sprocket idlers from Shoup's if they are not still being made.
Don
-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
Posted By: redline
Date Posted: 23 Sep 2010 at 8:16pm
Are they still available through AGCO? The common small one is 71100271 and the common larger one is 71116256. I think MayWes or somebody had wear blocks available that were made of some kind of High density poly something or another.
-------------
If it weren't for the last minute, I wouldn't get anything done!
|
Posted By: Skyhighballoon(MO)
Date Posted: 23 Sep 2010 at 8:49pm
I got a small supply of NOS ones plus a batch of good used ones at farm but don't tell Don...sssssshhhhhh! LOL! Mike
-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers
|
|