Classifieds - ISO 170 Carburetor

Print Page | Close Window

ISO 170 Carburetor

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=185560
Printed Date: 01 May 2025 at 3:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: ISO 170 Carburetor

Posted By: JeffKC
Subject: ISO 170 Carburetor
Date Posted: 05 Jan 2022 at 11:05am

Looking for a carburetor for a 170

Replies:

Posted By: DrAllis
Date Posted: 05 Jan 2022 at 11:28am

Yours not repairable ?? That is kind of an odd Zenith model carb and hard to find some parts for.

Posted By: JeffKC
Date Posted: 05 Jan 2022 at 3:30pm

Yea I need the whole carburetor

Posted By: DrAllis
Date Posted: 05 Jan 2022 at 4:52pm

A carb from an AC 175 tractor would work and bolt right on, even tho it is a Marvel Schebler brand. I think I could make one work from a Deere 2510 or 2520, as they sit on the engine pointed the same direction as the Allis does.

Posted By: sparky
Date Posted: 05 Jan 2022 at 8:38pm

Just my personal opinion but I’d rather have the Marvel-Schebler carb. I don’t think they are as “persnickety” as a Zenith.

-------------
It's the color tractor my grandpa had!

Posted By: DrAllis
Date Posted: 05 Jan 2022 at 8:50pm

I agree, Sparky. I like cast iron carbs.

Posted By: Steve in NJ
Date Posted: 05 Jan 2022 at 9:49pm

According to my book, it should have a 13294 Zenith on it. The 175/180 used a Marvel TSX 928 on them. We offer rebuilding services on the one you have if interested. I agree also on the Marvel......

Steve@B&B

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife

Posted By: DrAllis
Date Posted: 06 Jan 2022 at 7:23am

170's were always Zenith. 175's were always Marvel. 180's were Zenith and 190's were Holley in the beginning and then Bendix later on. All of them had the air inlet facing the radiator. Some in the aftermarket world (Steiners/All-States) for example will sell you a carb listed to fit a 170 or 175, but also fits a WD45 or D-17. They are not the same carb and unless there is choke and throttle linkage that are ambidextrous, there is no way they can or will work, but they are advertised to fit and work.

Posted By: JeffKC
Date Posted: 06 Jan 2022 at 7:45am

I agree with that the marvel is the better of the two. Thanks for the information.

Posted By: steve fischer
Date Posted: 10 Jan 2022 at 11:24pm

just put a m/s on a 170 ,have the zenith I took off

Posted By: JeffKC
Date Posted: 11 Jan 2022 at 5:53pm

What model m/s did you use? Was there a noticeable difference? How much are you asking for the zenith?