WD Handclutch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=185433
Printed Date: 27 Jan 2025 at 8:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD Handclutch
Posted By: Wot
Subject: WD Handclutch
Date Posted: 30 Dec 2021 at 2:10pm
|
I’m having some trouble with the handclutch of my WD. It kicks out if the tractor is not under load. I have removed shims, but it stil kicks out when not under load. When it is under light load, driving uphill, it stays engaged. It looks like the plate where the rollers need to roll over is worn out. But I’m not shure if that could be the problem? Maybe i can adjust something else? Thanks! 
|
Replies:
Posted By: MACK
Date Posted: 30 Dec 2021 at 9:07pm
| Engauge clutch, remove front snapring (wire ring) , Engauge clutch, rotate over center plate to new location. Engauge clutch, replace snapring and your ready to go. Over time it may work itself back. While top is off, make sure no pins have come out of linkage. MACK |
Posted By: Nathan (SD)
Date Posted: 30 Dec 2021 at 10:36pm
| Probably need to put the shims back in too.. |
Posted By: Wot
Date Posted: 31 Dec 2021 at 5:49am
| Great help, thanks! Will try and let you know. |
Posted By: Wot
Date Posted: 03 Jan 2022 at 8:52am
| Problem solved! Thanks! |